universal ac input / full range no load power consumption <0.3w erp step2 compliant meet eisa 2007 (energy independence and security act) 2 pole euro plug class power (without earth pin) protections: short circuit / overload / over voltage pass lps fully enclosed plastic case approvals: tuv / cb / fcc / ce 2 years warranty specification gs15e-1p1j gs15e-11p1j gs15e-2p1j gs15e-3p1j GS15E-4P1J gs15e-5p1j gs15e-6p1j gs15e-8p1j order no. safety model no. dc voltage note.2 rated current current range rated power ripple & noise (max.) note.3 output setup, rise, hold up time voltage range frequency range efficiency (typ.) note.7 ac current input environment inrush current (max.) leakage current(max.) safety standards safety & emc (note. 8) working temp. working humidity storage temp., humidity temp. coefficient vibration mtbf dimension others note packing protection 5v 7.5v 9v 12v 15v 18v 24v 48v gpsu15e-1 gpsu15e-1-1 gpsu15e-2 gpsu15e-3 gpsu15e-4 gpsu 15e-5 gpsu15e-6 gpsu15e-8 2.40a 1.60a 1.66a 1.25a 1.00a 0.83a 0.62a 0.31a 0 ~ 2.40a 0 ~ 1.60a 0 ~1.66a 0 ~ 1.25a 0 ~ 1.00a 0 ~ 0.83a 0 ~ 0.62a 0 ~ 0.31a 12w 12w 15w 15w 15w 15w 15w 15w 50mvp-p 80mvp-p 80mvp-p 80mvp-p 100mvp-p 120mvp-p 150mvp- p 240mvp-p voltage tolerance note.4 line regulation note.5 load regulation note.6 5.0% 5.0% 5.0% 5.0% 5.0% 5.0% 3.0% 3.0% 3.0% 3.0% 3.0% 3.0% 2.0% 2.0% 2.0% 0.5% 0.5% 0.5% 0.5% 0.5% 0.5% 0.5% 0.5% 2.0% 3000ms, 50ms, 16ms at full load 90 ~ 264vac 135 ~ 370vdc 47 ~ 63hz 75% 78% 80% 80% 80% 81% 83% 85% 0.5a / 100vac 50a / 230vac 0.25ma / 240vac en60950-1 approved withstand voltage isolation resistance i/p-o/p:3kvac i/p-o/p:100m ohms / 500vdc / 25 / 70% rh 500khrs min. mil-hdbk-217f(25 ) 0 ~ +50 (refer to "derating curve") 20% ~ 90% rh non-condensing -20 ~ +85 , 10 ~ 95% rh 0.03% / (0 ~ 50 ) 10 ~ 500hz, 2g 10min./1cycle, period for 60min. each along x, y, z axes 34*71*50mm (l*w*h) 180g ; 60pcs / 12kg / carton connector plug cable standard type for stock ther type available by customer requested p1j: 2.1 * 5.5 * 11mm, tuning fork type center positive ; o standard type 18 and 5ft for 3.3v output only for stock ther type available b y customer requested awg ul1185 6ft ; o voltage adj. range fixed 5 ~ 6v 6 ~ 8v 8 ~ 11v 11 ~ 13v 13 ~ 16v 16 ~ 21v 21 ~ 27v 33 ~ 48v 1.all parameters are specified at 230vac input, rated load, 25 70% rh ambi ent. 2.dc voltage: the output voltage set at point measure by plug terminal & 50% lo ad. 3.ripple & noise are measured at 20mhz by using a 12" twisted pair terminated w ith a 0.1uf & 47uf capacitor. 4.tolerance: includes set up tolerance, line regulation, load regul ation. 5.line regulation is measured from low line to high line at rated load. 6.load regulation is measured from 0% to 100% rated load 7.efficiency is measured at 230vac. 8.the power supply is considered a component which will be installed into a f inal equipment. the final equipment must be re-confirmed that it still me ets emc directives. features : compliance to en55022, en61000-3-2,3, fcc part 15 class b compliance to en61000-4-2,3,4,5,6,11, l criteria a ight industry level, overload over voltage 105 ~ 250% rated output power protection type : hiccup mode, recovers automatically after fault con dition is removed >120% rated output voltage protection type : clamp by zener diode 12~15w ac-dc single output wall-mounted type g s 1 5 e s e r i e s tuv rheinland product safety geprufresicherheit emc immunity emc emission file name:gs15e-spec 2011-06-14
mechanical specification derating curve file name:gs15e-spec 2011-06-14 unit:mm 10 20 30 50 40 11 71.5 1 34 1 id 2.1 x od 5.5 19 0.5 70 1 50 1 18.6 28 22 34.5 4 0.05 name plate ta ( ) load (%) 0 70 100 static characteristics input voltage load (%) 0 50 60 70 60 100 260 80 90 100 80 plug assignment standard plug: p1j p/n output p1j center + 12~15w ac-dc single output wall-mounted type g s 1 5 e s e r i e s c"+" ul1185 18awg 1830 +100/-0
|